PL-238wf 240 volt Specifications
|
PL-238wf 240 volt Specifications |
| Laminating Width | 38" |
| Speed | Max Mechanical Speed: 7 fpm Maximum Sustained Lamination Speed: 1.2 Mil @ 230 degrees 7fpm 3 Mil @250 Degrees 5 fpm |
| Laminate | Polyester, Polypropylene, Nylon, vinyl, and other plastics - Thermal or Cold |
| Max Film Thickness | 10.0 Mil |
| Max Substrate Thickness | .250 |
| Cooling Fans | 3 @ 110 CFM ea. = 330 cubic feet per minute |
| Warm Up Time | About 5 min. |
| Max Film Roll Dia. 1.5 mil | w/o stand 6", with stand 11" |
| Stand | Included, 3" Mandrels Included (1" optional) |
| Gapable rolls | Yes-Front Heat and Rear Pull Rollers |
| Temp Cont. | Solid State - Digital Readout 2 degree hysteresis |
| Motor / Speed Control | DC High Torque Gear Motor / Solid State Variable, Both Air Cooled |
| Slitters | 2 Micro-Adjustable optional |
| Heated Roll Watts | 1600 ea 3200 combined, X BTU's |
| Electrical Requirements | 240 Volt 60 Hz 20 Amps Dedicated Circuit |
| Dimensions | 49"W x 20"D 16"H -w/o stand 40"H-w/ stand |
| Shipping Dimensions 2 Packages | Laminator 18" x 54" x 20" / Stand 23" x 33" x 8" |
| Weight | Laminator and Stand 250 lbs |
| Shipping Weight | Laminator 180# Stand 70# |
